G20POE is suitable for lightning protections for over five types of Ethernet cable powered network devices, for the interface is installed between the lightning protection area of LPZ1-LPZ3, with two levels of protection function, ensure that the damage of over voltage and over current network equipment from lightning, industrial interference caused by lightning protection, wireless bridge, network cameras and other network equipment widely used in the power supply of the Ethernet cable.
The products are connected in series, which is in front of the input of the protected equipment.
When installing, the lightning protection grounding wire of the product should be directly connected with the lightning protection grounding grid of the engine room. The grounding should be reliable and the length of the grounding wire should be less than 0.5m.
This product does not need special maintenance. The green light is always on and the green light is off when the 48V DC power supply is working normally. It indicates the failure. At this time, it is necessary to remove the SPD to check whether the input power supply is normal. If the input power supply is normal, it means that the SPD has been damaged, it should be replaced immediately.
We have state-of-the-art infrastructure facility that has all the advanced machines that help us to manufacture best quality products. We upgrade our machines at regular intervals in order to enhance the productivity and quality rate. All the products we offer are made with high quality raw material and strictly follow international quality standards for accuracy and efficiency. We have a team of highly qualified professionals who deploy latest technologies in the process of manufacturing these products.
May the world stop fearing thunder and lightning
Escort the safety of mankind!
The effective production departments enable us to delivery the goods in time and each customer will be noticed about the delivery time before the order and to make sure customer’s benefit.
Providing the free samples for confirmation.
We have a strict standard on raw materials and will proceed more than 6 times inspection during the mass production, including the supervisor and machine inspection. Factory audit could be availability to our customers if necessary.
Q1: How can you tell if a surge protector is bad?
A: There's no surefire way to know if your surge protector is bad, but some come with warning lights that indicate you need to get a new surge protector.
Q2:What can you do?
A:1.All of our lightning surge protectors products have proceeded aging test before shipment and we guarantee safety while using our lightning surge protectors products.
2.Support imprint your logo on lightning surge protectors products and let your logo shine anywhere.
Q3 : Can you make customized products and customized packing?
A: Yes. We made a lot of customized products for our customer before. And we made many moulds for our customers already. About customized packing, we can put your Logo or other info on the packing.
Q4:How long have you been in business?
A:We have been making lightning protection for over 12 years.
Q5: How to order our product ?
A: 1).Please tell us the model and quantity and other request you need.
2).We make the PI for you.
3).After you confirm the PI, we arrange the order for you after receiving your payment.
4).After the goods finished, we send the goods out to you and tell you the tracking number.
5).We will track your goods until you receive the goods.