product Parameter
Product application
Class B+C surge protector is perfect for any kind of building being it residential, commercial, industrial and so on, these devices work as a complete protection device. In addition to this, you can also install transient voltage surge suppressor in those buildings, which get power via an overhead line resulting direct or partial lightning currents.
Product feature and details
1. Reaction rate: 10-9sec.
2. Type 1 + 2 AC surge protector
3. Pluggable module for each phase
4. Remote signaling (option)
Product qualification
Certificates of GB / T 19001-2016/ISO9001:2015, GB / T 24001-2016/ISO 14001:2015 and GB / T 28001-2011/OHSMS 18001:2007, combined with certificates from organizations such as CQC,TUV(CE) , ensure our products’ quality, reliability and RoHS compliant.
GADA factory locates in Liushi, Wenzhou, Zhejiang Province, covering an area of 2000m2.There are 100 well-trained workers, more than 10 rich experience production and R&D engineers.
FAQ
Q1: During a recent lightning storm, the power was turned off but some instruments were still damaged. Can you explain this?
A: Lightning jumped across the single-pole switch into the instrumentation. We would recommend to use a double-pole switch. However, this does not insure that a severe lightning surge will not damage. It is depending on the insulation resistance of the switch or the size of the lightening pulse. The only sure solution is to install a surge protector in line with the power source.
Q2: Where is the best place to install an SPD?
A:Ideally, an SPD should be installed at the main service entrance as
close to the neutral-to-ground bond as possible, This will ensure that surge energies are routed to earth by the most direct path. In larger facilities where distances between this primary protection and the equipment being protected are long, it is also good practice to use distributed protection all the way to point-of-use.
Q3: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
